If

2-output-module_2.jpg

Interception boards, with buzzer alarms, are used to protect electronic circuits from damage due to overcurrent or short circuit.

Installation and commissioning

Instructions for installation and commissioning.

Mounting in battery backup

The card is delivered mounted in it's plastic casing, for easy installation.

Mount the card on any card slot in the enclosure, leave space for cables.

Important

Install the board before screwing on wiring or commissioning.

VMC 2026 edition

Letter

Explanation

Comment

A

Optional card

Optional card comes mounted on plastic housing from factory. Has it come loose? Snap it back on before mounting the card.

B

Plastic casing

The plastic casing has hooks for attaching slots in the plate.

C

Place for plastic casing

Slits in sheet metal.

Short description

2_OUT_15A_kortoversikt.png
Table 1. Card overview

No.

Description

1.1, 1.2

- (minus) out.

2.1, 2.2

+ (plus) out.

3

Indication diode, lights green if there is a load plugged in.

4.1, 4.2

+ (plus) fuse, 15 A

5.1, 5.2

- (minus) fuse, 10 A

6

Indicating diode, lights green if there is plugged in power supply.

7.1, 7.2

- (minus) power supply from motherboard or other optional card.

8.1, 8.2

+ (plus) power supply from motherboard or other optional card.

9.1

Alarm, NO.

9.2

Alarm, CO

9.3

Alarm, NC.

10.1, 10.2

Alternate alarm connection.



Use the supplied cable

Use the cable that comes with the box to connect the card.

Connect 2 Output modules to motherboard PRO2v3 15A-25A

2_OUT_15A_inkoppling_PRO2v3_15_25A.png
Table 2. Connections 15 A and 25 A devices

Number/letter

Circuit Boards

Explanation

D

PRO2 v3

Motherboard in battery backup.

C

Power card

Available in battery backup 15 A and 25 A units.

1

A and B

Connect power supply from 2 output module (B) to 2 Output module 15A (A).

2

A

Connect alarm from 2 Ouput module 15A to load board.

A

2 Output module 15A

Optional card (A).

B

2 Modul de uitgang

Connect power supply (24V) to 2 Output module 15A (A).

3, 4

-

Internal power supply and communication between cards.



Product sheet - power supply / battery backup

Product Sheet

Product image

2-output-module_2.jpg

Product Identification

Table 3. Fuse card

Name

Article number

E-number (SE)

2 Output module 15A

A-FU00240M15ALM01

52 136 27



Technical description

2 Output Module 15 A is a termination board with 2 double-pole capped outputs. Used when more cargo outputs are needed. Input voltage 27.3 V DC and maximum total current 30 A. Protection against overcurrent and short circuit. Alarm for fuse failure can be sent to battery backup or separate input in NEO, NOVA and indicated via LED or relay switching. Supplied without enclosure and assembled in compatible product from Milleteknik.

Table 4. Quick Facts

Quick Facts

Supply voltage (V)

27.3 V DC (24 V DC)

Voltage out (V)

27.3 V DC, (24 V DC)

Current output (A), max load current output.

15A

Accessories for

Outdoor Enclosures.



Areas of application

Table 5. Areas of application

Areas of application

Yes

No

When additional cargo outputs are needed. Mounts in compatible power supply



Electrical data

Table 6. Electrical data

Electrical data

Supply voltage

27.3 V DC (24 V DC)

Standby consumption

0.96 W

Voltage out

27.3 V DC, (24 V DC)

Current (A)[a]

15A

Max current, full board

15A

[a] Power outlet/load is specified as max, normal current output should be 80% of max.



Table 7. Fuses

Fuses

Load fuses

15A



Table 8. Printed circuit boards and Internal power consumption

Circuit Boards

Internal power consumption

Other. info

2 output module 15A

35 mA



Load outputs

Table 9. Load outputs

Load outputs

Number of load outputs

! 2[a]

[a] Load outputs share on the total maximum load. The value does not apply per output



Table 10. Total maximum load and recommended load.

Total Max Load

Recommended total load[a]

15A

12A

[a] Typically, 70-80% of the maximum load is recommended in continuous operation, depending on the thermal margins of the product.



Alarm and protection

Table 11. Protection

Protection

Yes

No

Overload Protection/Surge Protection



Communication and Indications

Table 12. Communication and Indications

Communication and Indications

Yes

No

Other. info.

Communication to the parent system

Alarm feedback to power supply

Indications

LED on circuit board.



Enclosure and Mechanics

Table 13. Enclosure and Mechanics

Enclosure and Mechanics

Type

Printed circuit board, product does not have enclosure



Assembly, installation and eligibility requirements

Table 14. Fitting

Fitting

Yes

No

In product (optionally fitted in compatible product).



Table 15. Installation

Installation

Yes

No

Installed in product.



Dimensions, weight and packaging information

Table 16. Dimensions

Dimensions, (WxHxD).

Dimensions with packaging[a]

30 x 40 x 89mm

100 x 210 x 155 mm

[a] Dimensions (WxHxD) of product and packaging may differ, this is because the product may be oriented differently in the package.



Table 17. Weight

Net weight

Weight with packaging

0.1 kg

0.2 kg



Table 18. Packaging

Packaging

Packaging

Cardboard and impact protection in cardboard.

Quantity in pack

1 pc.

Packaging Type (GS1 T0137)

BX box.

Conditions EUR pallet

EUR pallets may not be stacked during transport or storage. Stacking may result in damage to product and packaging

Transport environment

The product must be protected from condensation and direct precipitation during transportation.

Transport temperature (without battery)

−30 °C to +70 °C

Storage environment

Dry indoor environment, protected from condensation. Relative humidity: max 95%, non-condensing

Storage temperature without batteries

−20 °C to +60 °C



The accessories fits in

Table 19. Number of cards that fit in the power supply.

Product series

Enclosure size

Number of cards that can fit[a]

ECO

M, L

2,4

ECO, NEO, NOVA

FLX S

2

EN54, NEO, NOVA

FLX M

3

NEO, NOVA

FLX L

3

19 rack module holders

4U

8

[a] The number of cards/accessories that can fit is the total number that can fit in the housing. Electronic and mechanical limitations may exist.



About this information

All information is published subject to possible errors. Information is updated without prior notice.

Publication date 2026-07-16

Compliance and regulatory compliance

Delivery time, warranty and terms

Table 20. Delivery time, warranty and terms

Delivery time, warranty and terms

Warranty period[a]

The product has a two (2) year warranty against manufacturing defects.

Special warranty conditions

See also general terms and conditions.

General Terms and Conditions

ALEM09 with exceptions, see: www.milleteknik.se/conditions/

Support

Telephone support and email support during the warranty period are free of charge. For spare parts that are not covered by warranty, there is a charge

Delivery and stock

Delivery time[b]

3 working days. Or as per agreement. Delivery from factory, transportation time is added.

[a] If the device is purchased through a wholesaler or other supplier, other warranty conditions may apply.

[b] In the case of larger orders, delivery time increases, acc. to agreement.



Operation and maintenance

Table 21. Operation

Operation

Data

Other. info

Environment

Indoor environmental class 1.

Operating temperature (recommended)

+15°C to +25°C

Operating temperature (permissible)[a]

+5°C to +40°C

Class 1 according to EN 50131-6/ EN 60839-11

[a] Specifies the permissible ambient temperature range in which the product can operate without damage. See also table on battery life.



Table 22. Maintenance

Yes

No

Interval

Other. info

Maintenance-free.



Certifications and approvals

Table 23. Approved according to

Complies with

Directives

C.E.

CE marking according to Regulation (EC) No 765/2008

RoHS

RoHS Directive 2011/65/EU, including amendment (EU) 2015/863

EMC

EMC Directive 2014/30/EU

Electric (LVD)

Low Voltage Directive 2014/35/EU



Environmental data

Table 24. Environmental data

Environmental data

J/N

Informație

Other. info.

Building Product Declaration (BPD)

Yes, see iBvd at www.milleteknik.se.

-

REACH Information Obligation

(EC) No 1907/2006

Yes, see the DoC at www.milleteknik.se The product complies with REACH Regulation (EC) No 1907/2006.

If empty, the product is not covered.

SVHC substances, CAS/EC

Yes, lead, 7439-92-1/231-100-4

For text, see iBvd at www.milleteknik.se. If blank, substance is missing.

Subject to the RoHS Directive, (EU) 2015/863)

Yes, see the DoC at www.milleteknik.se

WEEE

2012/19/EU

The product contains electrical components or wiring and is covered by the WEEE Directive (2012/19/EU).

If empty, the product is not covered. End-of-life products must be returned to a recycling centre

Battery Regulation

(EU) 2023/1542

SCIP No

2008/98/EC

Yes, registered under the EU Waste Directive where applicable, (2008/98/EC).

If empty, no SCIP number is needed.

Conflict minerals

(EU) 2017/821

✗/✗/✗/✗/✔

No=Gold, Tungsten, Tantalum, Cobalt. Yes=Tin

Tin in solders in printed circuit boards purchased through a Swedish supplier.

Contains nanomaterials:

EC 1272/2008

The product does not contain nanomaterials.

Ecodesign

2009/125/EC

Milleteknik's products are intended for professional use and are therefore not directly covered by the Ecodesign Regulation (EU 2019/1782). As some components may be covered, we nevertheless disclose relevant information[a], where applicable, to provide our customers with confidence in their choice.

Machine Directive

2006/42/EC

The product is part of electrical systems, is subject to the relevant electrical and safety directives and is not a machine according to the Machinery Directive (2006/42/EC).

Will be replaced by Machinery Regulation (EU) 2023/1230, which will apply in 2027.

The product is designed for a long service life, which reduces the environmental impact. End-of-life products are handed over to the nearest recycling centre.

[a] Standby consumption and power.



ce-marking-logo-kov.jpg
soptunna_atervinning.ai

Manufacturer and country of origin

Table 25. Manufacturer and country of origin

Manufacturer[a]

Milleteknik AB

Customs State. Nos.

85044095[b]

Country of origin

Sweden

[a] Manufacturer is the trademark indicated on the product, regardless of what is stated in this product sheet.

[b] Verify with the Customs Ombud/Customs Service for export/import; alternative classification 85044055 may become applicable if the product is assessed as a battery charger.



Appendix

Eligibility requirements, installation

Eligibility requirements vary between countries. The table summarizes national requirements for fixed installation and connection of equipment with a plug socket, respectively.

Options on the secondary side of the product, such as 12 V, 24 V or 48 V DC, are connected according to the respective instructions. Work on the network connection of the product shall be carried out in accordance with national eligibility requirements

Table 26. Eligibility requirements by country. Applies only to the installation of this product in a fixed network connection

Permission Requirements for Installation

Fixed installation (230 V)

Plug

Other. info

Sweden

Fixed installation may be performed by technicians but shall be under the responsibility of a qualified installer. (Electrical Safety Act, SS 436 40 00) Plug may be connected without authorization.

Norway

Requirements for qualified electricians also for equipment with a plug socket in fixed installations. (NEK 400, DSB

Finland

Plug may be connected without authorization. (Tukes, SFS 6000

Denmark

Plug may be connected without authorization. (Safety Board

Germany

All fixed installations require a qualified electrician according to VDE 0100. Plug sockets may be connected without authorization, but only by person with basic electrical knowledge (“Elektrotechnisch unterwiesene Person”)



Reference table: environmental classes according to EN 50130-5 (referred to in EN 50131-6)

Table 27. Reference table: environmental classes according to EN 50130-5 (referred to in EN 50131-6)

Class

Type

Temperature range

Environmental Class 1

Heated indoors (type office/residence).

+5°C to +40°C

Environmental Class 2

Generally indoors (type warehouses/stairwells, not temperature controlled).

-10°C to +40°C

Environmental class 3

Protected outdoors.

-25°C to +50°C

Environmental class 4

Generally outdoors.

-25°C to +60°C



About this information

All information is published subject to possible errors. Information is updated without prior notice.

Publication date 2026-07-16