Power supply with battery backup to power PoE devices such as surveillance cameras and other PoE powered devices. An additional load output for 24 V applications. Batteries continue , for example, to power the access system, when the power grid goes down.
PoE switch can be controlled by software, individual channels can be switched off.
Protection against: Overload, overvoltage, overtemperature, short circuit and deep discharge.
Controlled charging of batteries protects against overcharging and extends the life of batteries. Batteries are charged with a maximum of 0.5 A.
Alarms are given for: Delayed mains failure alarm or low battery voltage, disconnected batteries at start-up and fuse failure.
Mounted on: wall or in 19″ rack.
PoE Switch Managed 8p FLX L
Artikelnummer: FL01N10224P25008PM
E-nummer: 51 729 48
Primary switched eight port PoE power supply:
24 V battery backup.
4 x 30 V, 8 W/PoE port.
45 Ah battery (not included).
Expandable to 24 ports.
| Recommended environment | Indoor, class 1. Ambient temperature: +5°C to +40°C. For optimal battery life: +15°C to +25°C. |
|---|---|
| Security class (IP-klass) | |
| Recommended mounting | 19" rack, Wall |
| Height units | 10RU |
| Number of cable ports | 4, possible to have outlet holes on rear |
| Color | |
| Built in cooling fan | Yes |
| Voltage in (V) | 230 – 240 VAC, 50-60 Hz |
| Current out | 27.3 VDC (24 V) |
| Max effect per port | 30.8 W |
| Effect (W) in case of network outage | @54,6 VDC / 33W, @52 VDC / 31W, @48 VDC / 27W, @41 VDC in connection with deep discharge of batteries/25W |
| PoE budget | |
| Interface | 1000Base-T RJ-45 |
| Support for standard in accordance with | IEEE 802.3af, IEEE 802.3at |
| Functions | Auto-negotiation, Auto-uplink (auto MDI/MDI-X) |
| Available charging current (A) | 0.5 A |
| Rated power | 600W |
| Ripple i normal mode | 200 mVp-p |
| Efficiency | |
| heat generation at 50% / 80% of rated power | 17 W / 27 W |
| Current in (A) | 2 A |
| Number of unsecured (load-) outputs | |
| Type of fuse / ouput | |
| Battery type | 12 V maintenance free AGM battery |
| Batteries included | No |
| Protection against | Deep discharge of batteries, Excessive temperature, Over voltage, Overload, Short circuit |
| Alarm via | Changeover relay |
| Alarm functions | Battery not connected / fuse has blown., Fuse failure |
| Number of alarm outputs | 1 |
| Tamper switch | Optional |
| Lockable enclosure | Yes, two keys included. |
| Number of optional cards that can be placed | No optional card mounting possible |
| In-stock article | No |
| Normal dlivery time | |
| Guarantee period | 2 years |
| Product meets requirements in accordance with | CE directive in accordance with:765/2008, EMC Directive 2014/30EU, Emission: EN61000-6-:2001, EN55022:1998:-A1:2000, A2:2003 Class B, EN61000-3-2:2001, Immunity: EN61000-6-2:2005, EN61000-4-2, -3, 4, -5, -6, -11, Low voltage directive: 2014/35/EU |
| Producer | Milleteknik AB |
| Country of origin | |
| Not | All specifications subject to change in event of product changes or incorrect data |
Produktdokument
Produktsupport
Accessories
You may also like…
-
10+ Design Life AGM batteries10+ Design Life 20Ah Battery
