NEO Series is normally used in security facilities where the requirements are higher valid; higher flexibility, more alarm functions, longer spare operating times or when the battery backup needs to handle higher loads. The NEO 24V 5A FLX L offers controlled charging which means that the batteries are never charged by more than 3.4 A. This prevents the batteries from never overcharging and greatly extends their life. The NEO series can be used with both AGM batteries and Lithium LiFePO4 batteries. The NEO series offers intelligent charging which means that when the batteries are fully charged they will be electronically disconnected for standby mode for up to 20 days or when the batteries have reached 26.7 V. By discharging the batteries and having them recharged continuously (instead of being unused), the system extends the battery life by up to 50%. The batteries automatically connect in less than 50 microseconds, if needed. The NEO series can be used with both AGM and Lithium LiFePO4 batteries. The NEO FLX L series can be supplemented with up to 4 battery boxes (only 24 V). The battery boxes are connected via a 9-pin connector. The battery box can accommodate up to 2x 45Ah batteries per each battery box.
Recommended environment | Indoor, class 1. Ambient temperature: +5°C to +40°C. For optimal battery life: +15°C to +25°C. |
---|---|
Security class (IP-klass) | |
Recommended mounting | 19" rack, Wall |
Height units | 10RU |
Dimensioner (Höjd x Bredd x Djup) | 444 x 437 x 212 mm |
Number of cable ports | 4, possible to have outlet holes on rear |
Color | |
Net weight | |
Built in cooling fan | Yes |
Voltage in (V) | 230 – 240 VAC, 50-60 Hz |
Current out | 27.3 VDC (24 V) |
Max current | |
Available charging current (A) | Dependent upon power outlet, though max 3.4 A |
Rated power | 150 W |
Ripple i normal mode | 200 mVp-p |
Efficiency | |
heat generation at 50% / 80% of rated power | 8.4 W / 13.5 W |
Current in (A) | 1.7 A |
Number of unsecured (load-) outputs | |
Type of fuse / ouput | 2 F5A (glass) |
Deep discharge of battery occurs at | 21 VDC |
Battery type | 12 V maintenance free AGM battery |
Battery capacity | |
Recommended battery | 2 UPLUS 12 V, 45 Ah batteries |
Batteries included | No |
Protection against | Deep discharge of batteries, Excessive temperature, Over voltage, Overload, Short circuit |
Alarm via | Changeover relay |
Alarm functions | Battery disconnected (10 sec), Charger error overvoltage, Charger error undervoltage, Delayed power grid failure alarm (10 sec), Fuse failure, Tampering |
Number of alarm outputs | 2, separate output for tamper switch placed by door opening |
Tamper switch | Yes |
Lockable enclosure | Yes, two keys included. |
Number of optional cards that can be placed | Three L-module option, Two 10 output modules or two Fire module 4 outputs |
In-stock article | No |
Normal dlivery time | |
Guarantee period | 2 years |
Product meets requirements in accordance with | CE directive in accordance with:765/2008, EMC Directive 2014/30EU, Emission: EN61000-6-:2001, EN55022:1998:-A1:2000, A2:2003 Class B, EN61000-3-2:2001, Immunity: EN61000-6-2:2005, EN61000-4-2, -3, 4, -5, -6, -11. SS-EN 50 130-4:2011 Edition 2 & SSF1014 Alarm class 1-2 (Burgler alarm), Low voltage directive: 2014/35/EU |
Producer | Milleteknik AB |
Country of origin | |
Not | All specifications subject to change in event of product changes or incorrect data |
Product Files
- >CE, DOP, AMA, etc
- >NEO: bilder / images / bilder / kuvia
Support
- >NEO 24V 5A-10A FLX L – Support Svenska
- >NEO 24V 5A-10A FLX L – Support English
- >NEO 24V 5A-10A FLX L – Support Norsk
- >NEO 24V 5A-10A FLX L – Tukiasiakirj
Accessories
You may also like…
-
Accessories
Ground fault detector module
-
Battery boxes
Battery box 24V FLX M
-
Battery backup accessories
5 Output module
-
Battery backup accessories
2+2 Output module
-
Accessories
19 rack module holder
-
Accessories
19 rack DIN module holder
-
10+ Design Life AGM batteries
10+ Design Life 45Ah Battery
-
10+ Design Life AGM batteries
10+ Design Life 28Ah Battery
-
Battery backup accessories
10 Output module