Min varukorg

Search
Close this search box.

SINUS UPS 1100W FLX M

Article Number: FM01U00031FP011
E-number: 5213664

230V, 1100W UPS, holding two 20Ah batteries.

Designed with the latest switching technology and microprocessor monitoring for maximum efficiency and reliability, the UPS provides a long life span for both electronics and batteries. UPS is well protected with:

  • Insulation switch
  • Battery automatic fuse
  • Protection against overtemperature, overload and short-circuit.
  • Complete POST including Advanced Battery Test.
  • The device is installation- and service-friendly with compact volume.
  • Wall mounts are included.
  • All electronics on cassette for easy service or upgrade.

USAGE SINUS UPS is most commonly used for:

  • Camera monitoring, PoE switches and other security systems;
  • Gate and port control of smaller and larger industrial and garage doors.
Recommended environment

Security class (IP-klass)

Recommended mounting

Wall or 19" rack

Dimensioner (Höjd x Bredd x Djup)

224 x 437 x 212 mm

Net weight

Number of cable ports

4, possible to have outlet holes on rear

Color

Built in cooling fan

Yes

Spänningsform

Single phase sine wave voltage

Max effect in operation

1100 W

Max effect at start

2 kVA

Available charging current (A)

6.5 A

Voltage in (V)

230 – 240 VAC, 50-60 Hz

Power grid

Charger max 0.4 A + load

Current out

230 VAC

Rated power

1100 W

Efficiency

Idle power values

approx.10 W

Fuses

T0,5A – fuse contacts, T16A – fuse for power supply

Self test

Battery discharge, Battery discharge: continual monitoring of battery charger, Inverter: Test load of UPS (corresponding rated power over internal test load) in order to check function and sufficient output voltage.

Battery type

12 V maintenance free AGM battery

Recommended battery

2 UPLUS 12V 20Ah batteries

Battery loading

I / U in accordance with DIN 41773 Current limits

Batteries included

No

Protection

Automatic fuse: batteries are fused., Current limiting, electric. Approx. 200% of rated capacity., Deep discharge protection: When battery pole voltage goes under 19 V, Isolation switch: When opening the electrical cabinet one must turn the door handle to "0", which deactivates the input phase and UPS emergency stop., Optional: Residual current device: Can be installed on output (extra safety option in accordance with EN62040-1-1)., Overload protection: Disconnection of charging current in the event of overload 27.9 V., Short circuit protection: Shut down within 5 sec. in evet of major overload/short circuit in accordance with UPS EN62040-1-1standard. Automatic restart when power supply is returned.

Alarm via

Changeover relay

Alarm functions

Buzzer alarm, self test, Low battery voltage, Power failure

Number of alarm outputs

1

Tamper switch

Optional

Lockable enclosure

Yes, two keys included.

Number of optional cards that can be placed

No optional card mounting possible

In-stock article

No

Normal dlivery time

Guarantee period

2 years

Product meets requirements in accordance with

CE directive in accordance with:765/2008, EMC Directive 2014/30EU, Emission: EN61000-6-:2001, EN55022:1998:-A1:2000, A2:2003 Class B, EN61000-3-2:2001, Immunity: EN61000-6-2:2005, EN61000-4-2, -3, 4, -5, -6, -11, Low voltage directive: 2014/35/EU

Producer

Milleteknik AB

Country of origin

Not

All specifications subject to change in event of product changes or incorrect data

Product Files

Support

Accessories

You may also like…